Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.

Hazard Marking Paint

Highlights floors, steps and kerbs

  • Bright yellow – highly visible
  • Improves safety indoors and out
  • Easy to apply – one coat is usually enough
  • Can be applied to bare or painted concrete and metal
  • Resistant to grease and oils

Frequently bought together

Description

Watco Basics Hazard Marking Paint is based on a tough, solvent based polyurethane formula which can be applied to most surfaces. A separate unit of aggregate is supplied with Anti Slip Hazard Marking Paint, which is mixed into the paint to provide a finely textured slip resistant surface.  

Recommended areas of use

  • Ideal for interior and exterior line marking
  • Highlight step edges, trip hazards, kerbs, pillars, etc.
Specifications
Suitable for Concrete, wood, most metals, existing well bonded paint
Appearance Coloured. Smooth.
Finish Glossy, smooth
Interior or Exterior Interior and exterior
Composition Single pack, solvent based polyurethane
Number of components 1
Coverage 40m² per 5L per coat
Number of coats 2
Recommended number of coats 1
Dry film thickness 80 microns
Drying time Touch dry: 10 hours.
Curing time 24 hours at 20°C
Minimum application temperature 10°C
Storage 24 months in manufacturers unopened container.
Cleaning tools Clean tools with White Spirit.
Application

Surface preparation

Apply using a brush to mark lines, designate safety areas or highlight step edges. 
This versatile paint can also be applied by roller to cover larger areas, although two coats would be required for depth of colour. 
Remove grease and oil using Watco Bio D.  This can also be used to remove grease from existing paint.
If overcoating existing paint, please ensure it is well bonded. Lightly sand any smooth, glossy paint to provide a key.
Make sure the surface is clean and dust free before continuing.
If using the paint over larger areas of new concrete, it should be at least 2 months old and Watco Basics Acid Etcher used to reduce alkalinity.
Such areas of concrete should be sufficiently porous to allow the paint to penetrate and ‘key’.

Repair

Holes in excess of 5mm deep can be filled with Watco Basics Floor Repair Mortar, or providing the floor is reasonably level, Watco Pourable Repair Mortar
For repairs which need to be ‘feather edged’ to nothing, or for repairs to damaged joint edges, please refer to Watco Concrex epoxy resin repair mortar.  This should also be used if repairing broken kerb edges or step nosings.  

Application

Do not use if the floor temperature is below 10°C.
The surface must be dry. 
Stir the paint thoroughly. 
If using the Anti Slip Hazard Marking Paint, add the whole tin of aggregate to the 5L paint size, or half the tin to the 2.5L.
Stir the aggregate thoroughly into the paint. 
If applying with a roller, use the roller to work the paint into the surface of bare concrete. Two coats will be required.
If applying by brush, or for cutting in around edges, one coat is usually enough, but on rough or very porous surfaces a second coat may be required. 
Do not apply thickly.

Data sheets

Safety data sheets

Safety Data Sheet

Technical data sheets

Technical Data Sheet
Ask a question

Be the first to ask a question...

Ask a question
0 questions / 0 answers

€42.00 (Ex VAT)

In stock

Do you know the size of the area?

Specialist alternatives

Need something tougher?

Ensure you have the right level of durability for your floor

Painting your floor isn't an easy task, so getting the right level of durability will increase the longevity of your floor. In choosing a hardwearing product, you won't need to revisit the project for years.

Shop paint

Watco Epoxyline

(1)

Long lasting line marking for heavy wear areas

From €53.30 (Ex VAT)

Applying in cold conditions?

Complete your maintenance projects all year round

Conventional floor paints need to be applied above 10°c in order for them to cure. We’ve formulated products using the latest resin technology, so you can apply them temperatures down to -10°c.

All cold cure

Watco Toughline

(1)

Quality line marking paint for cold and exterior surfaces

From €61.20 (Ex VAT)

Tools and accessories

New
Acid Etcher

Acid Etcher

Essential preparation before painting

€25.50  (Ex VAT)

Watco Paint Mixer

Watco Paint Mixer

A manual mixer for thorough mixing of two-part coatings

€3.70  (Ex VAT)

12" Roller Frame & Handle

12" Roller Frame & Handle

A sturdy roller perfect for applying floor and wall coatings

From €9.30  (Ex VAT)

Paint Brush

Paint Brush

Professional paint brushes suitable for all coatings

From €2.60  (Ex VAT)

Watco Low Odour White Spirit

Watco Low Odour White Spirit

Ideal for cleaning tools after application

€5.80  (Ex VAT)

Watco Bio D

Watco Bio D

A heavy duty biodegradable cleaner for floor preparation

From €24.30  (Ex VAT)

Subscribe