NEW
You're viewing our new website experience.
Tell us what you think
search
0

€0.00

.

Watco Tack Coat

Epoxy resin adhesive primer for stronger repairs. New formula, designed for use with Concrex® in shallow, fiddly, or vertical repairs, it can be applied to damp or dry surfaces at temperatures about 0°C.

Watco Tack Coat Sub Zero is available for applications in cold conditions. See Product Details for more information.



Qty
remove add


Close

Request a Sample


If you know which product you need, please enter the product name and quantity. If you would like us to help you decide, please give a brief description of the space along with area size and whether internal or external.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Please enter the details of your quote request below, and we'll come back to you as soon as we can with your prices.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Fast Facts

Coverage 1 or 6 m².
Curing Time (hours) Watco Tack Coat should be sufficiently tacky to overlay after approximately 60 minutes at 15ºC - 20ºC, but this will be extended to 3 hours at 5ºC.
Recommended Coats 1

Accessories & Tools

Product Details remove

Watco Tack Coat is an epoxy resin adhesive primer for use before screeding with Watco Concrex® or before using Watco Concrex® Vertical. Watco Tack Coat Sub Zero is available for repairs during cold conditions.

RECOMMENDED AREAS OF USE

  • Suitable for internal or external applications
  • Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a key

FEATURES

  • Quick and easy to mix and apply
  • Watco Concrex® can be applied within 30 - 60 minutes
  • Watco Tack Coat cures in temperatures as low as -20°C

Specifications add

Usage Interior / Exterior Interior or exterior.
Properties An adhesive primer, used with Watco Concrex or before Watco Concrex Vertical grade, quick and easy to use.
Surfaces Floor, wall, ramps, steps.
Coverage 1 or 6 m².
Curing Time (hours) Watco Tack Coat should be sufficiently tacky to overlay after approximately 60 minutes at 15ºC - 20ºC, but this will be extended to 3 hours at 5ºC.
Pot Time (hours) 20 minutes maximum at 20°C when decanted into a shallow tray. Higher temperatures will reduce the pot life.
Recommended Coats 1

How to Apply add

SURFACE PREPARATION

Concrete Ensure surface is clean and free of all loose material. Watco Tack Coat may be applied over existing paint but all poorly bonded paint must be removed and well bonded paint roughened to provide a key. Check that there is no ice in the substrate.

Metal Remove any loose or flaking material and rust by wire brushing or disc grinding. Oil or grease should be removed with Watco Bio D and the metal allowed to dry. Watco Tack Coat should be applied immediately after cleaning and drying.

MIXING

Pour the contents of the smaller tin into the larger tin and mix thoroughly with a wide bladed tool. When using the 6m² pack decant into a shallow tray. Do not leave mixed components in the tin - the product will quickly become unusable and the tin become hot. Use immediately, the pot life of the mixed components is 20 minutes maximum at 20ºC, less at higher temperatures.

APPLICATION

Apply sparingly by roller or brush and allow to become ‘tacky’. Overlaying must be completed while the Watco Tack Coat is still tacky. This product should be applied above 10ºC to ensure proper curing.

Accessories & Toolsadd

Associations, Awards & Standards

Best Industrial and Warehouse Supply Business 2016 - ECMOD AwardBCF customer service award 2016ISO 9001 Bureau Veritas CertificationNBS PlusBritish Coatings FederationFeRFA - The Resin Flooring Association

Legal Policy | Privacy Policy | Cookie Policy
© 2018 Company Registered in England – Number 459144. VAT number 413208691. Registered office: Hays Galleria, 1 Hays Lane, London, SE1 2RD