Watco Solvent Based Safety Tape Primer image 1

Watco Solvent Based Safety Tape Primer image 2

Watco Solvent Based Safety Tape Primer image 3

Watco Solvent Based Safety Tape Primer

Increases the adhesion of self-adhesive tapes and treads

Binds weak surfaces so that floor tapes will stick
Ready in 30 minutes
For use on porous dusty surfaces
One coat brush application

Description

Solvent Based Tape Primer gives better adhesion on poor surfaces. Apply just one coat by brush and allow to dry (for about one hour) before applying Watco Surestep® range or Safety Tapes (not recommended for use with barefoot grade). A 500ml unit of primer is sufficient for the following:

Safety Tape - 2 rolls of 50mm x 18.3m
Safety Tape - 1 roll of 100mm x 18.3m or 1 roll of 150mm x 18.3m
Surestep® Treads - 27 pieces of 150mm x 610mm
Surestep® Tiles - 125 pieces of 140mm x 140mm

Specifications

Properties	Gives better adhesion for self-adhesive products like Watco Safety Tape or Surestep Treads on dusty/porous or gritty surfaces.
Surfaces	Floors, steps.
Interior or Exterior	Interior and exterior.
Primer required	No primer required.
Coverage	2-3m² per 500ml.
Recommended number of coats	1
Drying time	Up to 1 hour.