Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.

Watco Sprayline Plus

Fast, accurate and easy to apply industrial line marking paint

  • Touch dry in 15-20 minutes
  • Highly visible and weather resistant
  • Takes heavy traffic
  • Interior and exterior use

Frequently bought together

Description

Watco Sprayline Plus is an easily applied industrial grade aerosol paint designed to produce an accurate, clean line quickly when used with a Watco Sprayline Plus Applicator

Recommended areas of use

  • Definition of key areas on factory floors, car parking spaces etc.

Features

  • Fast, accurate application
  • Touch dry in 15–20 minutes and fully cured in 24 hours
  • Highly visible, durable and weather resistant
  • Suitable for exterior and interior use
Specifications
Properties Industrial grade aerosol paint system, fast and accurate application, highly visible, durable, weather resistant, easy to apply.
Suitable for Defining key areas on factory floors, car parking spaces etc.
Surfaces Floors.
Interior or Exterior Interior and exterior.
Coverage 750ml can produce a 50mm (2 inch) wide line approximately 60-105m long depending on thickness of application.
Drying time Drying times are dependent on the temperature at which the product is applied. For best results the temperature should be above 10°C in which case the product will be touch dry in 15 minutes.
Application

Surface preparation

Ensure the area to be sprayed is clean, dry, and free of loose material. Although Watco Sprayline Plus is suitable for most surfaces we recommend a small area is tested first to ensure compatibility with the existing surface. 

Application

If appearance is critical we recommend the application of a small trial area first. 

Shake the can vigorously. Once you hear a rattling sound, shake for a further 2-3 minutes to ensure paint is properly mixed. Remove cap, invert the can and aim the nozzle at the surface to be painted. Depress the pads each side of the nozzle to release the paint. This can may be fitted to an applicator (sold separately). In this instance, fit the can to the applicator and pull trigger to release the paint.

For a more accurate and denser line, ensure the can is in close proximity to the surface being painted. To avoid a build up of paint at one point, ensure that the applicator is in motion and over the start of the line prior to activating the trigger. 

Drying times are dependent on the temperature at which the product is applied. For best results the temperature should be above 10°C, in which case the product will be touch dry in 15 minutes.

Data sheets

Safety data sheets

Safety Data Sheet

Technical data sheets

Technical Data Sheet
Ask a question

Be the first to ask a question...

Ask a question
0 questions / 0 answers

€23.40 (Ex VAT)

This product is out of stock.

What our customers say

Subscribe