Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Please note: Our offices and warehouse are closed on Friday 29th March - Monday 1st April. You can still place orders as usual via the website. Any orders placed during this time will be processed from Tuesday 2nd April when we return to business as normal.

Watco Asphalt Crack Filler

For repairing and filling cracks in old asphalt and tarmac

  • Cures in 2 to 4 hours
  • Stops water ingress and erosion damage
  • Rubberised bitumen formula
  • Flexible and copes with movement
Frequently bought together
Description

Description

Unsightly cracks in asphalt can lead to water ingress, erosion and accelerated deterioration of the surface. This rubberised bitumen based product makes crack repairs easy. Simply decant the liquid into a watering can (or any spouted can) and pour into the crack. 

Recommended areas of use

  • Car parks
  • Walkways
  • School playgrounds
  • Tarmac and asphalt surfaces

Features

    • Flexible to allow for expansion and movement
    • Ideal for cracks up to 3mm wide
    • Cracks 3-25mm wide can be filled by mixing Watco Asphalt Crack Filler with sand
    • Long lasting protection against ingress of water
    • Can be overcoated with Watco Asphalt Paint or Watco Black Top if required
    • Suitable for inside and out
    • Excellent adhesion
Specifications

Specifications

Properties Flexible, long lasting, protects against ingress of water, can be overcoated, inside or out, excellent adhesion
Suitable for Asphalt/tarmac
Appearance Black
Interior or Exterior Exterior, Interior
Primer required No primer required
Composition Single pack, rubberised bitumen emulsion
Number of components 1
Coverage Approximately 100m x 5mm wide x 5mm deep crack per 5L
Application tools Spouted can
Curing time (at 15°C) 6 hours
Minimum application temperature 5°C
Shelf life 12 months in unopened container
Depth (mm) 25mm
Principle limitations This product is designed for use on bitumen based surfaces. It could soften surfaces which contain coal tar. If in doubt, apply a test area and check after 24 hours that no softening has occurred
Cleaning tools Use water and detergent if the product has not dried. Once dried, use white spirit
Application

Application

Preparation

Sweep or scrape out loose debris from the crack.

Application

Mix well before use. Do not use in wet or cold (below 5°C) conditions. Damp or cold weather will delay the drying time. The crack should be reasonably dry, although a little dampness may be tolerated.

Cracks up to 3mm wide: Pour the Watco Asphalt Crack Filler into the cracks using a spouted jug. Alternatively a watering can may be used. Brush out to a thin film any surplus liquid which overflows the edges of the crack. Once the Watco Asphalt Crack Filler has dried, dust with very fine sand or cement to remove any residual tack.

Cracks 3mm - 25mm wide: Prime the sides of the crack with a brush coat of Watco Asphalt Crack Filler. Mix Watco Asphalt Crack Filler with damp sand to produce a slightly stiff mortar. Trowel into the crack and smooth off. Once the mortar is dry, dust with very fine sand or cement to remove any residual tack.

Drying times vary widely depending upon weather conditions and size of crack. Dry, warm conditions will accelerate drying. The product sets by evaporation of water. Damp, cold conditions will therefore delay drying. As a guide, approximately 2-4 hours should be allowed for cracks up to 3mm and 6-10 hours for cracks up to 25mm.

Data sheets

Data sheets

Safety data sheets

Safety Data Sheet (IE)

Technical data sheets

Technical Data Sheet
Ask a question

Q&A

Be the first to ask a question...

Ask a question
0 questions / 0 answers

€55.45 (Ex VAT)

In stock

Tools and accessories

What our customers say

Watco Asphalt Crack Filler

Subscribe