Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Please note: Our offices and warehouse are closed on Friday 29th March - Monday 1st April. You can still place orders as usual via the website. Any orders placed during this time will be processed from Tuesday 2nd April when we return to business as normal.

Watco Weatherguard

Heavy duty, flexible weatherproofing

  • Flexible elastomeric formula resists cracking
  • Touch dry in 4-6 hours
  • Roller or brush application
  • Weatherproofs and protects exposed or painted masonry
Colour:
Frequently bought together
Description

Description

Applied as a one or two coat system, Watco Weatherguard 10 cures to a weatherproof and impact resistant finish. This tough elastomeric membrane is capable of withstanding up to 10 years or more of extreme weather and temperature changes. 

Recommended areas of use

  • Ideal for brickwork, concrete, masonry, tiles, wood and metal

Features

  • Easy clean surface
  • Breathable and flexible allowing surface movement
  • Multi-purpose: decorative, solar-reflective and anti fungal
  • Touch dry in 4 to 6 hours
Specifications

Specifications

Properties Decorative, elastomeric, solar reflective, anti fungal coating, hard-wearing, easy clean surface, breathable, weatherproof and impact resistant finish, is capable of withstanding up to 10 years or more of extreme weather and temperature changes
Suitable for Brick, masonry, stone, render (and other similar surfaces), painted surfaces
Finish Matt or low sheen, smooth
Interior or Exterior Exterior
Primer required No primer required
Composition Single pack, water based, elastomeric acrylic polymer
Coverage 40m² per 10L
Number of coats 1
Recommended number of coats 2
Dry film thickness 150 microns
Curing time (at 20°C) 4 hours
Minimum application temperature 10°C
Application

Application

Surface preparation

Brick, Masonry, Stone, rendered and other cementitious surfaces - The surface to which Watco Weatherguard 10 is to be applied should be clean, dry and free of any loose material and contamination. Use a fungicide to remove any fungi, mildew or moss, etc. Scrape off any loose paint. Exisiting hard smooth, glossy paint should be lightly sanded to provide a key. Wash with a detergent solution, rinse with water and allow to dry. Make good any minor defects with an external filler or sand/cement mix.

Wooden Surfaces - All bare wooden surfaces should be clean and dry. Do not apply to door or window frames or previously painted wood, unless all traces of old paint has been removed.

Mixing

Do not stir, but blend in any thin liquid that may have appeared on the surface of the product.

Application

If appearance is critical we recommend the Application of a small trial area first.

Apply Watco Weatherguard 10 by brush or roller in one direction at the rate of 4m² per litre, allowing the first coat to dry before applying the second coat.

Ask a question

Q&A

Be the first to ask a question...

Ask a question
0 questions / 0 answers

€168.90 (Ex VAT)

In stock

Do you know the size of the area?

Tools and accessories

What our customers say

Watco Weatherguard

Subscribe