An ultra durable non slip finish for decking. Prolongs life of decking
Watco Decksafe® Advanced uses the latest polyaspartic resin technology for an exceptionally durable protective and anti slip deck coating. It has outstanding abrasion resistance and will resist chalking, fading, weathering and has exceptional resistance to UV. Watco Decksafe® Advanced will also tolerate movement and vibration without cracking.
| Properties | Protect and prolong the life of decking, and give an anti slip finish |
| Suitable for | Wood |
| Finish | Glossy, textured |
| Interior or Exterior | Exterior, Interior |
| Primer required | No primer required |
| Composition | 2 part polyaspartic resin with aggregate |
| Coverage | Approximately 20m² per 2.5L |
| Number of coats | 1 |
| Recommended number of coats | 1 |
| Dry film thickness | 100 microns |
| Curing time (at 20°C) | 6 hours |
| Minimum application temperature | -10°C |
Surfaces to be treated should be clean, dry and free from mould or any other surface contaminant likely to cause adhesion problems, such as wax, grease, oil etc. Some pre-treated woods are sealed which can create adhesion problems. Splash on a small amount of water. If beading occurs the surface will need to be lightly sanded, to create a key, or left and re-tested at a later date.
If appearance is critical we recommend the application of a small trial area first.
Stir thoroughly with a broad stirrer before use. A short pile roller is recommended but a brush may be used for small areas. Apply two full coats.
