Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.

Free Delivery Over €500

100% Satisfaction Guarantee

Expert Help & Advice

Watco Concrete Floor Paint

Our toughest ever high gloss, single pack floor paint

  • Superior impact, hardness and adhesion
  • Tested to CE Mark EN1504-2
  • ‘Best Ever Formula’ twice as durable as before
  • 12 standard RAL colours
Description

Our unique formula is based on a blend of ceramic, ‘diamond hard’ wax and polyurethane resin, has produced a ‘Best in Class’ single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. 

All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. 

Recommended areas of use

  • Production Areas
  • Warehouses
  • Workshops

Features

  • Professional quality, single pack polyurethane coating
  • Transforms and dustproofs drab, stained concrete
  • Ideal for identifying production and storage areas and traffic aisles
  • Easy to use and easy to keep clean
  • Superior performance demonstrated by ISO testing to CE mark EN 1504-2
  • High Gloss, Matt & Anti Slip versions available
  • New formulations to RAL colour shades
Curing TimesRecoat TimeTouch DryLight TrafficFull Use 
10°C24 hours16 hours48 hours72 hours  
20°C16 hours10 hours24 hours36 hours 
30°C16 hours6 hour24 hours36 hours 
Light Traffic: Foot, trolley, pallet truck, occasional forklift
Specifications
Suitable for Concrete, wood, most metals, existing well bonded paint. The moisture content of concrete should be less than 75% RH.
Finish High gloss, smooth.
Interior or Exterior Interior.
Primer required Not usually. See ‘Priming’ section in 'Application'.
Composition Solvent based, polyurethane.
Number of components 1
Coverage 40m² per coat.
Number of coats 2
Wet film thickness 120 microns.
Dry film thickness 80 microns.
Minimum application temperature Air temperature 15°C, floor temperature 10°C.
Shelf life 12 months in unopened containers.
Cleaning tools White Spirit.
Application

Surface preparation

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry. 

New Concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating. 

Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer

Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete (do not use on a previously painted surface since it can soften paint).

Application

The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours), and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.

€71.90 (Ex VAT)

In stock

Do you know the size of the area?
Delivery options
Standard
Click & Collect

Specialist alternatives

Need chemical resistance?

Ensure your floor surface is resistant to chemical attack

Chemical resistance is important for areas that store or use chemicals. To protect the surface and increase its longevity, you’ll need a coating that stands strong against chemical spills.

All chemical resistance

Watco Chemi-Coat

A high build epoxy resin with excellent chemical resistance

From €177.47(Inc VAT)

Need something tougher?

Ensure you have the right level of durability for your floor

Painting your floor isn't an easy task, so getting the right level of durability will increase the longevity of your floor. In choosing a hardwearing product, you won't need to revisit the project for years.

Shop paint

Watco Epoxy Gloss Coat

Epoxy paint reinforced with diamond hard wax and ceramic

From €132.90(Inc VAT)

Need a flexible coating?

Give flexibility to areas prone to movement

Flexible coatings are ideal for areas where vibration, movement or impact may occur as the coating moves with the substrate to avoid splitting or cracking.

All flexible

Watco Flexicoat

A flexible coating for floors subject to vibration and movement

From €154.80(Inc VAT)

Need ultra-rapid curing?

Get back to business faster with our Rapid formulations

Take the stress out of painting your floor with our rapid curing products. You can clean, prepare and paint your floors in as little as just one day.

All rapid

Watco Fastcoat

The fastest drying performance coating you can buy

From €138.88(Inc VAT)

Tools and accessories

What our customers say

Help & Advice

Contact our friendly and professional Technical Advisors for expert help and advice for your project. You can give us a call on 01 6725 180 or email sales@watco.ie

Contact us

Subscribe