Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Covid-19 service update: We’re open for business, but due to high demand, our delivery and customer service teams are busier than usual. Please bear with us and allow 4-5 working days for delivery. Learn more.
x

Watco Epoxicote High Build

Industrial strength 100% solids epoxy resin

  • Heavy duty protection for floors
  • Thick, glossy and strong
  • Excellent chemical resistance
  • One coat high build application

Frequently bought together

Total price

€234.40 (Ex VAT)

This item: Epoxicote High Build LIGHT GREY, 4L €167.50 (Ex VAT)

Description

Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The ‘rapid’ versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the ‘anti slip’ versions provide a good level of slip resistance where needed.

All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.

Recommended areas of use

  • Very heavily trafficked floors
  • Production areas
  • Showrooms
  • Warehouses
  • Garages
  • Receptions
  • Oil & chemical areas

Features

  • Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip
  • One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat
  • Glossy, attractive, easily cleaned finish
  • Excellent resistance to oil and chemicals
  • Low odour: safe to use in confined spaces
  • Cures within 8 hours to withstand light traffic (see ‘Rapid’ versions)
  • Superior performance demonstrated by ISO testing to CE Mark EN1504-2
     
 TemperatureRecoat TimeTouch DryLight TrafficFull Use
Epoxicote High Build & Anti Slip10°C
20°C
30°C
16 hours
10 hours
6 hours
12 hours
6 hours
4 hours
24 hours
16 hours
8 hours
48 hours
48 hours
16 hours
Epoxicote Cold Cure5°C
10°C
20°C
30°C
24 hours
16 hours
12 hours
6 hours
16 hours
12 hours
6 hours
4 hours
30 hours
24 hours
16 hours
8 hours
72 hours
48 hours
48 hours
16 hours
Epoxicote Rapid, Advanced, Advanced Anti Slip10°C
20°C
30°C
12 hours
6 hours
4 hours
8 hours
4 hours
3 hours
16hours
8 hours
6 hours
48 hours
16hours
16 hours

Full Chemical Resistance: 7 days

Light Traffic: Foot, trolley, pallet truck, occasional forklift

Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

Specifications
Suitable for Concrete, sand and cement, well bonded paint and some metals. The moisture content of concrete should be less than 75% RH.
Finish Coloured, high gloss, smooth.
Interior or Exterior Interior.
Primer required Not usually. See ‘Priming’ section in 'Application'.
Composition High build, 100% solids epoxy resin.
Number of components 1 x curing agent and 1 x resin.
Coverage 18m².
Number of coats 1
Mix ratio 100 parts resin : 24 parts curing agent.
Pot time (hours) 25 minutes at 20°C.
Wet film thickness 220 microns.
Dry film thickness 220 microns.
Minimum application temperature Air temperature 15°C, floor temperature 10°C.
Shelf life 12 months in unopened containers.
Cleaning tools It is not practical to clean applicators and they should be discarded after use.
Application

Surface preparation

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

New Concrete – as a guide, new concrete should be left for eight weeks to dry (if the Application has to go ahead before this, use Watco New Concrete Primer). The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Painted surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, do not use on a previously painted surface since it can soften paint.

Priming – is not usually required, but for open textured, or very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer to ensure a uniform finish and to prevent air entrapment bubbles. Very smooth or power floated concrete should be primed with Watco Powerfloat Primer.

Metal – remove any rust and flaking material by disc grinding or wire brushing. Apply the coating immediately after Preparation to the clean metal surface. Grease or oil can be removed using Watco Bio D. Allow the metal to dry before coating.

Galvanised Metal – Watco Galvaprime must be used to prepare galvanised metal.

Non-ferrous Metals - for advice, please contact our Technical Department.

Mixing

Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin, (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool, (a piece of wooden batten is ideal) and do not thin. Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin. In the anti slip versions the slip resistant particles are already pre-blended (in the Curing Agent).

Application

Important - once the contents of the pack have been mixed, a chemical reaction takes place which creates heat. The product should therefore be decanted into a shallow tray to avoid reducing the pot life and used straight away. Best results are obtained in warm (minimum of 15°C), dry conditions with good ventilation. Apply one coat with a medium pile roller, (not foam), working well into the surface of the concrete. On vertical surfaces 2 thin coats are recommended. Do not exceed the maximum coverage of 18m² per 4L pack. Do not wash or allow water to lie on the surface for at least 7 days.

Case studies

€167.50 (Ex VAT)

In stock

Do you know the size of the area?
Bulk discounts save up to 20%
Quantity Price per item Discount
1+ €167.50 -
6+ €150.80 Save 10%
20+ €134.00 Save 20%
Bulk discounts applied in basket

Specialist alternatives

Need chemical resistance?

Ensure your floor surface is resistant to chemical attack

Chemical resistance is important for areas that store or use chemicals. To protect the surface and increase its longevity, you’ll need a coating that stands strong against chemical spills.

All chemical resistance

Watco Chemi-Coat

A high build epoxy resin with excellent chemical resistance

From €177.20 (Ex VAT)

Need a flexible coating?

Give flexibility to areas prone to movement

Flexible coatings are ideal for areas where vibration, movement or impact may occur as the coating moves with the substrate to avoid splitting or cracking.

All flexible

Watco Flexicoat

A flexible coating for floors subject to vibration and movement

From €40.27 (Ex VAT)

Tools and accessories

Watco 4 Hour Epoxy Primer

A fast drying primer for porous surfaces

€68.10  (Ex VAT)

Watco Etch & Clean

Essential for preparing bare concrete ready for painting

€26.60  (Ex VAT)

Mixing Blade

A metal mixer ideal for mechanically mixing paint

€12.50  (Ex VAT)

12" Roller Frame & Handle

A sturdy roller perfect for applying floor and wall coatings

From €8.40  (Ex VAT)

Paint Brush

Professional paint brushes suitable for all coatings

From €2.40  (Ex VAT)

Help & Advice

Contact our friendly and professional Technical Advisors for expert help and advice for your project. You can give us a call on 01 6725 180 or email sales@watco.ie

Contact us

Subscribe