Versatile, strong anti slip strips for steps, ramps and heavy wear areas
Watco Epoxy Grip Strip is a highly effective and extremely versatile non slip flooring treatment.
Strips of Watco Epoxy Grip Strip can give a more attractive finish than a conventional coating. On outdoor steps it also allows rainwater to drain away more easily.
Each pack contains the Cartridge, nozzle, grit and spreader.
|Interior or Exterior||Interior and exterior.|
|Primer required||No primer required.|
|Coverage||One 310ml tube will provide a line approximately 10m long by 15mm wide.|
Ensure surfaces are clean and dry. Do not apply to cold (less than 10°C) or damp substrates.
Do not mix the epoxy resin paste until you are ready to use it, since it must be applied immediately after Mixing.
Each pack contains a tin of curing agent and a separate tin of resin. Add the contents of the curing agent tin to the tin of resin and mix thoroughly using a palette knife or similar. Scrape down the sides and bottom of the tin during Mixing to avoid unblended resin/curing agent creating soft spots in the cured product. Once mixed, pour into the 310ml cartridge supplied and close the open end with the plunger. Place the cartridge into the skeleton gun and fit the nozzle once the end has been cut off.
Painting your floor isn't an easy task, so getting the right level of durability will increase the longevity of your floor. In choosing a hardwearing product, you won't need to revisit the project for years.Shop paint