A tough wall and ceiling coating for industrial environments
This industrial coating provides superb hiding power with just one application. Specially formulated for industrial and commercial premises, it covers normally in one thick coat to provide, in half the time, a bright clean appearance to walls and ceilings. The special high build, non-drip formulation eases application.
Suitable for | Concrete, brick, render, plaster, painted surfaces |
Finish | Matt |
Interior or Exterior | Interior |
Composition | Single pack, high opacity acrylic emulsion |
Coverage | 50m² per 10L per coat |
Recommended number of coats | 1 |
Dry film thickness | 140 microns |
Curing time (at 15°C) | 10 hours |
Minimum application temperature | 10°C |
A minimum of surface preparation is necessary, but contaminants and any loose material should be removed. Surfaces which are loose and friable or very porous should be primed with a 50% dilution of Industrial Wall Coating with water.
If appearance is critical we recommend the application of a small trial area first.
Watco Industrial Wall Coating is best applied in one thick coat with a 5” brush. A paint roller may be used, but as it applies more sparingly, a second application may be necessary. To spray or in exceptional temperature conditions, advice should be obtained from Watco’s Technical Department.
Medium pile roller and tray for applying floor and wall paints
€13.55 (Ex VAT)
Industrial Wall Coating