A versatile line marking paint for inside and out
Trafflicline is an advanced flexible acrylic formulation which is suitable for almost any surface - it can even go over existing paint. Easy to use and water based for an easy clean up.
| Properties | Easy to use, flexible acrylic formulation, high build one coat application, brushes wash out easily with water, solvent free, ideal for light and medium traffic |
| Suitable for | Asphalt/tarmac, porous concrete |
| Finish | Low sheen, smooth |
| Interior or Exterior | Exterior, Interior |
| Primer required | No primer required |
| Composition | Single pack, water based acrylic |
| Coverage | 100m - 200m x 50mm wide line per 5L |
| Number of coats | 1 |
| Recommended number of coats | 1 |
| Dry film thickness | 140 microns |
| Curing time (at 15°C) | 24 hours |
| Minimum application temperature | 15°C |
Watco Trafficline can be applied to asphalt, tarmac, porous concrete, masonry, bricks, breeze blocks and most metals. Ensure the surface is clean, sound and dry (slightly damp is acceptable). Watco Bio D is a solvent free degreaser which can be used on asphalt and similar surfaces. Watco Trafficline can be applied to existing paint providing all poorly bonded material is removed and glossy surfaces are dulled using abrasive.
If appearance is critical we recommend the application of a small trial area first.
Apply Watco Trafficline by brush. Avoid applying too thickly. Do not apply externally if rain or frost are forecast or if the temperature is below 10°C. The second coat should be applied after approximately 1 hour.
In exceptional temperature conditions advice should be obtained from Watco’s Technical Department. (01483 418 418)
