How to Achieve a Hard Wearing Painted Floor for Heavy Wear Areas with Epoxy Gloss Coat

How to Apply Watco Epoxy Gloss Coat - Step-by-Step Guide

In this video, we'll walk you through the process of applying Watco Epoxy Gloss Coat to achieve a hard-wearing, high-gloss finish for heavy wear areas. transform your surfaces creating a durable, high-gloss finish. Whether you're working on a concrete floor, a garage, or any other high-traffic area, Watco Epoxy Gloss Coat offers incredible protection and a smooth, glossy finish that lasts for years.

By the end of this video, you'll know exactly how to get a professional finish with Watco Epoxy Gloss Coat, making your floors look better and last longer.

𝗟𝗶𝗻𝗸𝘀 𝗮𝗻𝗱 𝗿𝗲𝘀𝗼𝘂𝗿𝗰𝗲𝘀:

𝗤𝘂𝗶𝗰𝗸 𝗹𝗶𝗻𝗸𝘀:

00:00 Start
00:12 What you will need
00:25 Step 1, Preparation of the surface
00:46 Step 2, Mixing Epoxy Gloss Coat
01:25 Step 3 Application of Epoxy Gloss Coat

Don't forget to like, comment and subscribe for more tips and tutorials!

Video Transcript:

How to achieve a hard wearing painted floor for heavy wear areas with Watco Epoxy Gloss Coat.

What you'll need:

Watco Epoxy Gloss Coat
Watco Painting Kit
12“ Roller Frame & Telescopic Handle
Plastic Scuttle
2“ and 5“ Paint Brush
Electric Drill fitted with Mixing Blade

STEP 1 – PREPARATION

Thoroughly clean the surface to ensure it is free of dust and dirt.
If applying to hard, smooth, powerfloated concrete use Watco Powerfloat Primer.
If the concrete is new or bare, remove surface laitance, dust and any light dirt or grease deposits using Watco Etch and Clean.

STEP 2 – MIXING

Remove the two inner tins.
Stir the content of both tins thoroughly.
Pour the mixed components back into the larger tin.
Mix thoroughly with a mixing blade until even in colour and consistency.
Pour the coating into a plastic scuttle for immediate use.

STEP 3 – APPLICATION

Use a paint brush to cut in around the edges of the surface.
Apply using a medium pile roller. Best results are obtained in warm (minimum 15C), dry conditions with good ventilation.
The coating will darken slightly as it cures, and it should not be over rollered.
The second coat can be applied as soon as the first coat is dry (generally 4-6 hours).

WATCO EPOXY GLOSS COAT An ideal choice for an attractive, low maintenance, hard wearing floor finish.