A rapid drying road paint suitable for concrete and asphalt
Watco Asphalt Paint Rapid is a hard wearing one coat paint, that is ideal for coating exterior concrete and asphalt. It is showerproof in only one hour and can be applied at temperatures as low as 5°C. Easy to apply by brush or roller and it offers exceptional wear resistance making it ideal for heavy traffic areas.
|Properties||Fast curing – showerproof in only 1 hour, can be applied at low temperatures.|
|Suitable for||Old asphalt/tarmac, bare concrete|
|Surfaces||Bare concrete or asphalt.|
|Interior or Exterior||Exterior|
|Primer required||No primer required.|
|Composition||Single pack chlorinated rubber|
|Coverage||15-18m² per 5L|
|Number of coats||1|
|Recommended number of coats||One coat is usually sufficient.|
|Dry film thickness||Approximately 250 microns|
|Curing time||2 hours at 20°C|
|Minimum application temperature||5°C|
Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dirt, oil, laitance and light to medium grease with Watco Bio-D, or for thick deposits of grease use Watco Concroff®.
If appearance is critical we recommend the application of a small trial area first.
No need to stir. Easily apply by roller or brush. Make sure the lid is not left off the product for any length of time to prevent it drying out.