Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Please note: For guaranteed Pre-Christmas delivery, please place your order before Friday 8th December 

Watco Bitu-Mend Advanced

For asphalt repair in car parks and loading bays where forklifts and lorries operate

  • Unique technology
  • Epoxy resin formulation
  • Accepts HGV traffic
  • Fix holes from 10mm to 100mm
Bulk discounts save up to 10%
Quantity Price per item Discount
1+ €147.00 -
6+ €132.30 Save 10%
Bulk discounts applied in basket
Frequently bought together

Total price

€193.00 (Ex VAT)

This item: Watco Bitu-Mend Advanced €147.00 (Ex VAT)



Watco Bitu-Mend® Advanced is a type of pothole repair product for filling holes in asphalt and similar type floors. The epoxy resin formulation is much stronger and longer lasting than traditional bitumen based products. Its strength allows for thinner repairs than most conventional products and it is ideal for heavily trafficked areas.

Recommended areas of use

  • Potholes in asphalt and tarmac
  • Work areas
  • Car parks and loading bays where forklifts and lorries operate
  • Splits and cracks in asphalt
  • Roller shutter door guide rails


  • Cures to a hard, black, slip resistant finish
  • Can be applied at any thickness from 10mm - 100mm
  • Can also be used on concrete
  • Ready for use in 12 hours
  • Bed in and fix roller shutter door guide rails etc.
  • Resurface worn, eroded asphalt in gangways and work areas
  • Repair trip hazards and potholes in asphalt and tarmac


Suitable for Asphalt, concrete
Interior or Exterior Exterior, Interior
Primer required Watco Tack Coat
Composition 2 part epoxy resin plus aggregate
Coverage 1m² per 25kg at 15mm thick
Application tools Trowel
Application Tip mixture into the void
Curing time (at 20°C) 12 hours
Pot life Working life of mixed components: Approximately 30 minutes at 10°C
Storage Between 10°C - 30°C
Shelf life 12 months in unopened container
Depth (mm) 100mm
Principle limitations Food products must be removed from the area during application and cure


Surface preparation

Ensure the void to be filled is clean, dry (slight damp is acceptable) and sound.


Mixing is easier on a board, but it can be done in the plastic container provided. Empty the contents of the smaller Curing Agent tin into the larger Resin tin and mix thoroughly using a palette knife or similar wide bladed tool. Immediately empty the mixed components onto the granite aggregate. Mix using a trowel to achieve a loose textured black compound. Ensure that the dry aggregate is thoroughly coated.

Bitu-Mend Advanced Application

Tip the mixed product into the void and work into any gaps and crevices with a trowel. Lightly tamp down with a piece of wood, compacting the product to remove air pockets. Finish with a trowel.

Ask a question


Be the first to ask a question...

Ask a question
0 questions / 0 answers

€147.00 (Ex VAT)

Low stock

Do you know the volume of the area?
Bulk discounts save up to 10%
Quantity Price per item Discount
1+ €147.00 -
6+ €132.30 Save 10%
Bulk discounts applied in basket

Tools and accessories

What our customers say

Watco Bitu-Mend Advanced