Fast, pourable and strong repairs for asphalt and tarmac
Total price
€182.95 (Ex VAT)
For decades we’ve been recommending our bestselling Flowpatch® pourable repair mortar for fast, pourable and strong repairs to concrete. Now, we’ve reformulated this winning formula so you can use it to repair asphalt and tarmac surfaces too.
The surface of asphalt and tarmac erodes over time, due to general wear and tear, causing the surface to become dished and damaged. Traditionally, repairs would involve cutting out around the damaged asphalt and refilling with a similar material. With Watco Flowpatch Asphalt Repair, just pour the mixture straight over the top of the surface erosion and used to fill holes up to 100mm deep in just one layer.
| Suitable for | Asphalt, Tarmac and can also be used on concrete |
| Finish | Dark grey |
| Interior or Exterior | Exterior, Interior |
| Composition | Fibre reinforced polymer, and cement based dark grey powder |
| Number of components | 1 |
| Coverage | Approximately 0.5m2 at 25mm thick |
| Application tools | Steel float or trowel. A mixing blade fitted into an electric drill helps with mixing |
| Application | Pour into hole |
| Curing time (at 15°C) | 3 hours |
| Minimum application temperature | 5°C |
| Pot life | Approximately 5-10 minutes at 20°C (longer at 15°C). Do not mix more than you can use within a few minutes |
| Storage | Store in dry, frost free conditions |
| Shelf life | 12 months in unopened container |
| Depth (mm) | 100mm |
| Cleaning tools | Wash with water before the product dries |
Asphalt or Tarmac should be at least 6 months old. New asphalt is too oily and mobile and could cause the product to crack.
Surfaces should be reasonably level so that the mixture can be poured into the repair.
Use a stiff brush to sweep out any loose material and contamination. Grease or oil should be scraped out or removed using a degreaser such as Watco Bio D. Repairs can be made to damp but not saturated surfaces.
Remove the bag of powder from the plastic bucket and use the bucket, or any other suitable container, for mixing.
Due to the short working life of the mixed product, we recommend that you mix it close to the area to be repaired and only mix as much as you can use in 5-10 minutes. It is also useful to have a bucket of clean water to rinse the tools before the product dries.
The mix is 1 part water to 3 parts powder by volume. Use a measuring jug or beaker to put one or more measures of water into the mixing bucket. Add 3 measures of powder for every one measure of water. Add the powder gradually to the water, stirring continuously. Use a piece of batten or similar for small mixes, or a mixer fitted to an electric drill for larger quantities (Watco Flowtop Mixer is ideal).
The product is ready when an evenly coloured, smooth, pourable consistency is achieved. Use immediately and complete within 5-10 minutes.
Pour onto the damaged asphalt. It can be applied from 5mm to 100mm in depth and “feather edged” around the repair (full strength is achieved at 5mm).
If filling holes deeper than 100mm build up in layers not exceeding 100mm thick, and allow 12 hours drying between each layer. If resurfacing larger damaged, worn patches of asphalt, aim to achieve a thickness of at least 3-5mm.
The product will flow and settle into the repair, a trowel may be required to help distribute it across the repair area. Clean tools in water when you have finished.
€166.80 (Ex VAT)
Low stock
|
|
|
|
|
|
|---|---|---|---|---|
|
This product:
Watco Flowpatch Asphalt Repair |
Watco Concrex Asphalt Repair |
Watco Bitu-Mend® Pothole Repair |
Watco Bitu-Mend Advanced |
|
|
€166.80 (Ex VAT) |
€268.75 (Ex VAT) |
From €75.80 (Ex VAT) |
€147.00 (Ex VAT) |
|
|
Please make a product selection to continue |
View | View | View | |
| Composition | Fibre reinforced polymer, and cement based dark grey powder | 2 part epoxy resin plus aggregate | Single pack bitumen & aggregate blend | 2 part epoxy resin plus aggregate |
| Durability | Heavy | Extreme | Heavy | Extreme |
| Suitable for asphalt & concrete | - | |||
| Deep fill version available | - | |||
| How applied | Pour | Trowel | Shovel and tamper | Trowel |
|
Please make a product selection to continue |
View | View | View |
Ideal for smoothing and levelling off repair materials
€9.70 (Ex VAT)
