NEW
You're viewing our new website experience.
Tell us what you think
search
0

€0.00

Watco Flowpatch, Quick setting and self leveling concrete patch material
.

Watco Flowpatch

A self levelling concrete patch repair material which is quick setting, pourable and can be used in heavy wear areas. 

 



Qty
remove add


Close

Request a Sample


If you know which product you need, please enter the product name and quantity. If you would like us to help you decide, please give a brief description of the space along with area size and whether internal or external.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Please enter the details of your quote request below, and we'll come back to you as soon as we can with your prices.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Fast Facts

Usage Interior / Exterior Interior or exterior.
Coverage 0.5m² per 25kg at 25mm thick approximately.
Curing Time (hours) Pedestrian traffic:- 30-60 minutes at 15-20°C, forklift traffic:- 2 hours at 15-20°C.

Accessories & Tools

Product Details remove

Flowpatch® is an easy to mix pourable material, ideal for quick repairs to level concrete, inside or outside. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application.

We recommend Watco Flowpatch Deep Fill® for repairing or levelling deeper holes between 10-200mm in concrete flooring. 

RECOMMENDED AREAS OF USE

  • Ideal for filling deep holes before screeding with Watco Flowtop®
  • For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex®
  • For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop®

FEATURES

  • Just add water, mix and pour
  • Can be applied to damp (not wet) concrete
  • Sets at low temperatures (down to 5°C)
  • Flowpatch® can be applied from feather edge to 100mm
  • Light grey, slip resistant finish
  • Odourless, non-toxic, non-hazardous formula
  • Fibre reinforced

Products You May Be Interested In remove

Watco Flowpatch Deep Fill Details
Flowpatch sub zero being poured to repair concrete hole Watco Flowpatch Sub Zero (formerly Freezer Patch) Details
Watco Concrex 10kg tub Watco Concrex Epoxy Repair Mortar
grade
grade
grade
grade
grade
(5)
Details

Specifications add

Primer Required No primer needed.
Usage Interior / Exterior Interior or exterior.
Suitable For For quick repairs to flat concrete inside or outside.
Properties Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures.
Surfaces Floor.
Coverage 0.5m² per 25kg at 25mm thick approximately.
Curing Time (hours) Pedestrian traffic:- 30-60 minutes at 15-20°C, forklift traffic:- 2 hours at 15-20°C.

How to Apply add

SURFACE PREPARATION

The substrate should be clean and free from oil or contaminants. Any loose material should be removed from the surface. If possible wire brush the surface. Edges of the repair should be cut to depth to avoid feather edging in heavy wear areas. Watco Flowpatch can be applied to damp (not wet) concrete. 

MIXING

Remove the bag of powder from the plastic bucket and use the empty bucket or other suitable container for mixing. To mix, add the powder to water. Use a ratio of 175–225ml of clean cold water to 1kg of powder (as a guide approx. 3.5 units of powder by volume to 1 unit of water). 

Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair, not near to the water source. It’s also useful to have a bucket of water nearby, so you can quickly immerse and clean the tools after use. Put the water into the empty bucket or container and gradually add the powder stirring constantly to achieve a pourable slurry. For small quantities mix by hand using a flat bladed tool such as a spatula, and for larger quantities use a mixer fitted into a slow speed electric drill. Do not add excessive water or drying time will be extended and the performance may be impaired. As the mixture hardens quickly, pour the Flowpatch into the hole to be repaired immediately. We do not recommend re-stirring as this could potentially weaken the final repair. Do not mix more than you can use within a few minutes (5–10 minutes at 20°C). The remaining powder can be stored for future use. 

APPLICATION

When a smooth consistency is achieved, simply pour Watco Flowpatch in to the hole. If the product has been properly mixed it will self level and will need minimal trowelling. Watco Flowpatch can be applied to any depth between 5mm and 100mm, Flowpatch Deepfill can be applied to depths of 10-200mm. Repairs in lightly trafficked areas can be feather edged, but thin edges are not recommended for medium or heavily trafficked repairs.

Accessories & Toolsadd

Associations, Awards & Standards

Best Industrial and Warehouse Supply Business 2016 - ECMOD AwardBCF customer service award 2016ISO 9001 Bureau Veritas CertificationNBS PlusBritish Coatings FederationFeRFA - The Resin Flooring Association

Legal Policy | Privacy Policy | Cookie Policy
© 2018 Company Registered in England – Number 459144. VAT number 413208691. Registered office: Hays Galleria, 1 Hays Lane, London, SE1 2RD