Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.

Watco Chemi-Coat Anti Slip

A chemical resistant, anti slip coating for concrete floors

  • Only one high build coat required
  • Excellent slip resistance
  • Takes heavy traffic
  • High resistance to aggressive chemicals

Frequently bought together

Total price

€275.90 (Ex VAT)

This item: Chemi-Coat Anti Slip LIGHT GREY, 4L €201.80 (Ex VAT)

Description

Watco Chemi-Coat® Anti Slip is a one coat high build epoxy resin coating which offers excellent slip resistance and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer.

Recommended areas of use

  • Areas where chemical spillage or heavy wear occur.

Features

  • Hard aluminium oxide grit for maximum wear resistance
  • Tough epoxy resin base resistant to many chemicals
  • Low solvent content
  • Superb glossy appearance
  • Easy to apply - aluminium oxide grit is pre-blended into the curing agent, so this is a simple two componant application
Specifications
Properties Anti slip surface, excellent resistance to many chemicals, solvent-free, high build epoxy resin, excellent durability.
Suitable for Concrete, well bonded paint, some metals
Appearance Gloss.
Finish Glossy, textured
Surfaces Floors.
Interior or Exterior Interior
Primer required Yes on very porous surfaces.
Composition 2 part, 100% solids epoxy resin
Coverage 18m² per 4L
Number of coats 1
Recommended number of coats 1
Pot time (hours) 1 hour at 15°C.
Dry film thickness 220 microns
Curing time 16 hours at 20°C
Minimum application temperature 15°C
Application

Surface preparation

Concrete and Brick - concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Etch & Clean and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio D (or a similar degreasant) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surfaces should preferably be abraded to improve adhesion.

Steel - remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Oil or grease should be removed with Watco Bio D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.

Mixing

Each Chemi-Coat pack consists of a container of curing agent and a container of resin. The curing agent and resin must be very thoroughly mixed together with a wide bladed tool until an even colour is obtained. 

Important: Once the contents of the pack have been mixed a chemical reaction takes place which causes a rise in temperature and speeds up the curing of the product.

Application

If appearance is critical we recommend the application of a small trial area first.

Best results are obtained in warm conditions, (minimum 15°C). On horizontal surfaces apply with a medium pile type roller (not foam) in one coat. On vertical surfaces two thin coats are recommended. The second coat should be applied within 24 hours.

Test results

Extensive testing is what makes us the most highly qualified paint and repair manufacturer on the market. Our tests cover just about everything you might want to know about a floor coating – how well it bonds to the floor, how durable it is, how well it stands up to scratching and much more.

Our key tests for Chemi-Coat:

  • Chemical resistance: Excellent chemical resistance against the most common chemicals. Chemi-Coat Acid Strength has a modified formula, which makes it more resistant to acid – up to 98% sulphuric.
  • Flexibility: measured via the Mandrel Flex Tester ISO1519, Chemi-Coat measures at 2mm, which is the highest flexibility rating.
  • Gloss Value: 98 -  Measured on an Optical Glossmeter, +85% is High Gloss
  • Wolff-Wilborn Hardness test -  Chemi-Coat is rated 9H (the hardest)
  • Adhesion: 4.5MPa – Chemi-Coat well exceeds the CE pass mark which is greater than 2

Learn more about the tests we carry out and how to read the results here
Full test results can be found on the Technical Data Sheet

Ask a question

Be the first to ask a question...

Ask a question
0 questions / 0 answers

€201.80 (Ex VAT)

In stock

Do you know the size of the area?

Compare with similar products

Ratings Composition Durability Anti Slip Chemical Resistant Interior or Exterior Finish Number of coats
This product: Watco Chemi-Coat Anti Slip

From

€201.80

(Ex VAT)

Please make a product selection to continue

(2)
2 part, 100% solids epoxy resin Very heavy Excellent Interior Glossy, textured 1

Please make a product selection to continue

Watco Chemi-Coat

From

€195.40

(Ex VAT)

(2)
2 part, 100% solids epoxy resin Very heavy Excellent Interior Glossy, smooth 1
Watco Chemi-Coat Acid Strength

From

€221.30

(Ex VAT)

(2)
2 part, 100% solids epoxy resin Very heavy Excellent plus Interior Glossy, smooth 1
Watco Bund Sealer

From

€207.90

(Ex VAT)

(1)
2 part, 100% solids epoxy resin Very heavy Excellent Interior and exterior Glossy, smooth 1
This product:

Watco Chemi-Coat Anti Slip

Watco Chemi-Coat

Watco Chemi-Coat Acid Strength

Watco Bund Sealer

From

€201.80

(Ex VAT)

From

€195.40

(Ex VAT)

From

€221.30

(Ex VAT)

From

€207.90

(Ex VAT)

Please make a product selection to continue

View View View
Composition 2 part, 100% solids epoxy resin 2 part, 100% solids epoxy resin 2 part, 100% solids epoxy resin 2 part, 100% solids epoxy resin
Durability Very heavy Very heavy Very heavy Very heavy
Anti Slip
Chemical Resistant Excellent Excellent Excellent plus Excellent
Interior or Exterior Interior Interior Interior Interior and exterior
Finish Glossy, textured Glossy, smooth Glossy, smooth Glossy, smooth
Number of coats 1 1 1 1

Please make a product selection to continue

View View View

Tools and accessories

Watco Etch & Clean

Watco Etch & Clean

Essential for preparing bare concrete ready for painting

€33.50  (Ex VAT)

Paint Brush

Paint Brush

Professional paint brushes suitable for all coatings

From €2.60  (Ex VAT)

Watco Paint Mixer

Watco Paint Mixer

A manual mixer for thorough mixing of two-part coatings

€3.70  (Ex VAT)

Watco Painting Kit

Watco Painting Kit

Everything you need to make painting floors easy

From €49.80  (Ex VAT)

12" Roller Frame & Handle

12" Roller Frame & Handle

A sturdy roller perfect for applying floor and wall coatings

From €9.30  (Ex VAT)

What our customers say

Subscribe