Permanent granite hard repairs where ordinary mortars fail
Concrex® cures to a granite-hard finish that is impervious and non-dusting.
Properties | Incredibly tough, granite–hard finish, chemical–resistant, anti–slip, priming not normally required, impervious and non-dusting, may be feather-edged, cures in 3–6 hours at ambient temperatures, ready for heavy traffic in 8–12 hours. |
Suitable for | Concrete, metal, brick, masonry |
Appearance | Smooth, impervious surface. |
Surfaces | Floors, ramps, steps. |
Interior or Exterior | Interior and exterior |
Primer required | Tack Coat Primer is essential for shallow applications and screeding. |
Composition | 2 part epoxy resin |
Coverage | 1.2m² at 5mm thick per 10kg |
Pot time (hours) | 30 minutes. |
Curing time | 5-6 hours at 20°C |
Minimum application temperature | 10°C |
Surfaces to be treated must be clean, dry and free of friable material, a wire brush or sweep is usually sufficient. Watco Bio-D degreaser can be used if there are spots of oil or grease.
Each bucket contains Concrex powder and bottles of hardener. Mix the two components with a trowel until you achieve a uniform grey colour, you can complete the Mixing by using your gloved hands. For large quantities, it is advisable to use a mixer.
Apply the repair mortar to the surface to be repaired and smooth with a trowel. To prevent streaks, wipe the blade with a rag soaked in White Spirit.
Extensive testing is what makes us the most highly qualified paint and repair manufacturer on the market. Our screeds and repair products are tested in areas of tensile, compressive strength and flexural strength.
Concrex is far stronger than concrete, we don’t need to say it, we can prove it. Here’s a comparison:
Watco Concrex | Concrete | |
Tensile Strength | 15.4 MN | 3.4MN |
Flexural Strength | 55.9MN | 6.9MN |
Compressive Strength | 55.2MN | 21.41MN |
Learn more about the tests we carry out and how to read the results here
Full test results can be found on the Technical Data Sheet
Quantity | Price per item | Discount |
---|---|---|
1+ | €97.90 | - |
6+ | €88.10 | Save 10% |
18+ | €78.30 | Save 20% |
Bulk discounts applied in basket |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
This product:
Watco Concrex Epoxy Repair Mortar |
Watco Concrex Asphalt Repair |
Watco Bitu-Mend® Pothole Repair |
Watco Flowpatch |
|
|
|
|||
From €97.90 (Ex VAT) |
€218.90 (Ex VAT) |
From €61.70 (Ex VAT) |
From €52.00 (Ex VAT) |
|
Please make a product selection to continue |
View | View | View | |
Composition | 2 part epoxy resin | 2 part epoxy resin plus aggregate | Single pack bitumen & aggregate blend | Reinforced cement & polymer powder |
Durability | Extreme | Extreme | Heavy | Heavy |
Suitable for asphalt & concrete | Concrete | Both | Both | Concrete |
Deep fill version available | ||||
How applied | Trowel | Trowel | Shovel and tamper | Pour |
Cold setting version available | N/A | |||
Please make a product selection to continue |
View | View | View |
Our chemists have developed cold curing products with the latest resin technology so you can continue with your repair projects all year round.
All cold cureif you are repairing an area where chemicals are stored or regularly used, you will need to ensure the repair material can stand up to chemical attack.
All chemical resistancePermanent floor repairs with excellent chemical resistance
€130.90 (Ex VAT)
Our Deep Fill alternatives allow you to apply them at much thicker depths in one application. Meaning you can get a more economical formula that delivers the same strength and reduces downtime.
All hole repairFlexible formulations are ideal for areas where vibration, movement or impact may occur. The material moves with the substrate to avoid it breaking up or cracking.
All flexibleIf you are repairing an asphalt substrate, then we have a range of bitumen based products that help blend in with the existing environment.
All asphalt repairUltra-strong repairs to damaged concrete and asphalt
€218.90 (Ex VAT)
Contact our friendly and professional Technical Advisors for expert help and advice for your project. You can give us a call on 01 6725 180 or email sales@watco.ie
Contact us