A tough waterproof and anti slip coating for roofs
One coat of Watco's roof paint seals and weatherproofs most surfaces and provides a tough, slip resistant finish. The colours can be used to indicate clearly where access is permitted on the roof. The thick, flexible formulation also makes an ideal emergency repair since it can be applied in the wet and is immediately water repellent.
Great for walkways, flat roofs, effective weatherproofing for flat or pitched roofs and plastic or metal gutters. Not suitable for roofs with a lot of foot traffic, for this use Watco Liquid Roof Membrane Anti Slip.
| Properties | Flexible, waterproof, slip resistant surface, solvent based acrylic reinforced with fibre, 'high build' formulation |
| Suitable for | Porous asbestos and fibre sheets, corrugated iron, concrete, felt |
| Finish | Matt, fine texture |
| Interior or Exterior | Exterior |
| Primer required | No primer required |
| Composition | Single pack, solvent based acrylic |
| Number of components | 1 |
| Coverage | 10m² per 5kg |
| Number of coats | 1 |
| Recommended number of coats | 1 |
| Application tools | Medium pile roller, brush. |
| Application | Apply generously by brush |
| Curing time (at 10°C) | 24 hours |
| Minimum application temperature | 5°C |
| Storage | Between 15°C - 25°C for at least 8 hours prior to use. Do not allow to freeze |
| Shelf life | 24 months in unopened container |
| Principle limitations | Not for use on balconies, EPDM rubber roofs, new asphalt or new bitumen surfaces or timber and plywood substrates, new or aged PVC and GRP. In extremely high temperatures the coating may soften slightly, but will return to its original state as the temperature drops |
| Cleaning tools | It is not practical to clean applicators. They should be discarded after use |
Remove loose material and dirt. Apply a suitable fungicide solution to surfaces contaminated with moss or algae etc. Emergency repairs may be carried out in the wet but we recommend that the surface is as dry as possible if undertaking long term repairs or complete refurbishment.
If appearance is critical we recommend the application of a small trial area first.
Apply at temperatures above 5°C. Stir well before use. One coat generously applied by brush or medium pile roller is generally sufficient.
