Project Profile:
High Build floor surface makeover for commercial vehicle workshop
When you buy from Watco, we guarantee outstanding strength, reliability, and ease of use, along with our unrivalled knowledge and support. We are at the forefront of design and innovation, continually creating unique formulations to deliver the best possible results. Whether you’re repairing, painting or line marking, our best-in-class products deliver long lasting performance every time.
This superior repair mortar has been embedded with carbon fibre particulates, to provide permanent repairs to concrete floors, ramps & steps.
Choose from our Concrex Carbon Fibre 10kg and 25kg packs, or you can buy a bundle containing everything you need.
Recommended areas of use repairs to damaged steps, fitting guide rails, worn floors, expansion joints, different levels and holes.
Concrex colours is a great way to repair your floors whilst still maintaining the attractive coloured finish to your floor. Suitable for use inside or out and it cures to a granite-hard finish, making it virtually indestructible. It’s also ideal for thin section, feather edge or intricate repairs to concrete surfaces.
Our Concrex Colours formula also comes in a cold set version (Concrex Colours Cold Set), this has all the same features with the added benefit of the ability to cure in low temperatures.
Recommended areas of use Holes in concrete floors, damaged steps, broken floor joints, eroded or uneven concrete.
Repair vertical surfaces quickly and efficiently with Concrex Vertical. This non-slump formulation is approximately a third of the density of ordinary mortars, which means it’s ideal for repairing vertical surfaces without slumping or falling out as it dries. For cold rooms or external areas, see Concrex Vertical Cold Set.
Recommended areas of use Damaged concrete pillars, sills, beams, render and stone work. Frost spalled and damaged concrete surfaces or areas with exposed reinforcement.
Watco Concrex Coving Mortar is specially formulated to make it easier to create coved skirting in hygienic environments. This mortar is incredibly tough, chemical and impact resistant, even when applied with feather edges.
Recommended areas of use Ideal for hygienic environments such as hospitals, food halls and bunds.
Concrex Deep Fill is ideal for filling deep holes quickly and economically. Concrex Deep fill can be used in one layer between 15mm - 100mm and it can be left as a wearing surface, which has a coarse textured finish. If a smooth finish is required use Concrex Deep Fill to within 5mm of the floor level, and then overlay with Watco Concrex Carbon Fibre.
Also available in rapid curing and cold curing formulations – see Concrex Cold Set Deep Fill and Concrex Deep Fill Rapid
Recommended areas of use: Suitable for use inside and out on damaged steps, holes, broken floor
joints and eroded or uneven concrete.
When it comes to concrete repairs in unheated or freezing areas, ordinary mortars would fail. Therefore we've adjusted our original Concrex formula so you can repair your surfaces all year round. Use Concrex Cold Set for areas down to 0°C, or our polyaspartic formulation, Concrex Sub Zero for areas as cold as minus 20°C. No matter which one you choose, you're guaranteed a long-lasting repair that can withstand even the toughest of industrial traffic.
Recommended areas of use: inside or outside, freezer or chiller rooms, holes in concrete floors, damaged steps, broken floor joints or eroded or uneven concrete.
Most asphalt repair materials remain slightly soft and are therefore unsuitable for areas where heavy or narrow wheeled trolleys and forklifts are used. However, Concrex Asphalt Repair is our premium epoxy designed for ultra strong repairs to asphalt surfaces. It will withstand the heaviest of use and is also ideal for repairing thin asphalt screeds and toppings.
Recommended areas of use: Repair potholes, gangways, car parks, loading bays and guide rails.
Typically areas subject to movement are problematic to repair. Areas such as these tend to be repaired and subsequently crack or spall due to the movement of the substrate. With Watco Concrex Flex, you can repair these areas for good. Concrex Flex is designed to move alongside the substrate, providing a permanenet repair where a rigid mortar might fail.
Where to use: For floors subject to movement, vibration (such as around machinary), or impact.
Concrex Acid Strength is ideal for repairing acid damaged concrete floors. Our formulation has been developed to give outstanding chemical resistance, even against 95% sulphuric acid. It offers all the strength, ease of use and durability of our original Concrex formula, but it is ideal for areas where chemicals are used or stored.
Where to use: Repairs to floors, ramps or steps in areas where strong chemicals are stored or used.
Showcasing our toughest products, formulated to last
In this special edition, we have selected our toughest formulations that stand out from the crowd and outperform all other products you can buy
Project Profile:
High Build floor surface makeover for commercial vehicle workshop
Extra thick for heavy traffic areas in warehouses, garages, receptions, oil & chemical areas
From €216.35 (Ex VAT)
Epoxy resin primer for preparing bare concrete for painting
€100.35 (Ex VAT)
A thick 'high build' anti slip coating for exceptional wear protection. For heavy traffic areas
From €228.05 (Ex VAT)
A thick virtually solvent free epoxy. One coat protection for heavily trafficked surfaces
From €228.05 (Ex VAT)
The ultimate rapid setting high build epoxy resin floor coating for interior concrete
From €228.05 (Ex VAT)
