For shallow surface repairs to damaged or cracked asphalt and tarmac
Watco Bitu-Mend® Pour & Restore is ideal for shallow repairs to damaged or cracked asphalt and tarmac. Just mix and pour over pitted, dished or worn surfaces and it self smoothes with just a little help from a trowel. The strength of epoxy resin combined with granite means that thin section repairs and resurfacing are tough enough for cars and lorries. The kit contains granite aggregate which is sprinkled over the repair to provide a slip resistant surface which blends in with the surrounding area.
| Properties | Ideal for shallow repairs |
| Suitable for | Asphalt, concrete |
| Finish | Granular, black, slip resistant surface |
| Interior or Exterior | Exterior, Interior |
| Composition | 2 part epoxy resin plus aggregate |
| Number of components | 1 x resin and aggregate mix, 1 x curing agent, 1 x accelerator, finishing aggregate |
| Coverage | 1m² at 10mm thick per 15kg |
| Application tools | Trowel |
| Application | Pour the mixed product onto the damaged asphalt and spread out using a trowel |
| Curing time (at 20°C) | 16 hours |
| Pot life | orking life of mixed components: Approximately 15 minutes at 20°C, less in higher temperatures |
| Storage | Between 10°C - 30°C. Do not allow to freeze |
| Shelf life | 24 months in unopened container |
| Depth (mm) | 20mm |
Ensure the hole is clean, dry (slight damp is acceptable) and clear from debris.
Pour the tins of Curing Agent and Accelerator onto the Resin and aggregate mix in the outer bucket.
PLEASE NOTE: If you are repairing a number of small areas and need to extend the working life of the mixed product, or if the temperature is above 23°C do not use the Accelerator. Use a wide bladed tool to ensure thorough mixing.
Pour the mixed product onto the damaged asphalt and spread out using a trowel. The product will self-smooth to a level finish. Before the Bitu-Mend Pour & Restore cures, sprinkle the finishing aggregate over the repair.
